A filter press is a time tested & is most commonly used liquid-solid separation equipment. It is used to reduce the bulk & weight of a product to filtered by separating liquid filtrate and solid filter cake. This process is often referred to as dewatering. Given below are the steps involved in operation:

Continuou Belt Press Features:
1.The principal part adopts stainless steel as its material and possesses high strength. It is rust- less.
2. The filter cloth imported from Swiss, to provide the best performance and long service life.
3. Air chamber type automatic deviation correction device is set to assure stable running of the filter cloth.

- The process slurry is pumped at the inlet of equipment using a feed pump 
- Filtration occurs inside filter press in series of chambers designed to increase filtration area & filtration rate. 
- Filtered liquid (filtrate) passes through filter cloths and exits the machine leaving behind solids (filter cake). 
- Filter cake remains inside chambers of equipments. this cake can be washed with solvent and/or washed with compressed air as per process requirements. 
- The equipment is then opened and the filter cake is discharged by gravity as each plate is shifted.

Belt Filter Press for sale，Above operation is a batch process. Depending on the particular application, the filter press may be used to recover either the solid particulate, the liquid stream, or both. The filter press accomplishes dewatering within a series of chambers into which a process slurry is pumped using a feed pump.