Disinfection with ultraviolet light (UV) is a widely recognized and proven way of treating industrial wastewater in sectors like food and beverage, microelectronics plus oil and gas. When microorganisms such as bacterias, viruses and protozoa are exposed to ULTRAVIOLET light, the UV energy damages their genetic material. This process, referred to as thymine dimerization, eliminates the pathogens’ ability to reproduce and cause contamination. 

ultraviolet water purification

Disinfection is not the same as sterilization, but contact with UV light is effective against Electronic. coli, Crytosporidiym, Giardia and other sorts of pathogens. For disinfecting water, ULTRAVIOLET light in the UV-C or shortwave UV band is used. This music group or category of UV light is a type of electromagnetic energy that is unseen to the human eye and has a lower wavelength than sunlight. UV light to get water treatment is also used in complete organic carbon (TOC) reduction as well as the destruction of chlorines, chloramines plus ozone. 

Rubber door seals design In wastewater treatment facilities, steel gates are bolted to cement frames to control the flow associated with water and to channel effluent intended for disinfection. To seal the spaces between the gates and frames, rubberized gaskets are installed. These door seals must withstand prolonged contact with water, mechanical stress from stiffened fasteners and abrasive contact with the particular concrete frames. Resistance to UV gentle is critical, of course , but gate closes may also need to resist a range of temps and specific substances.

Not all rubber compounds may meet these and other requirements. For instance , natural rubber provides good resistance from tearing and fatigue, but will never resist prolonged exposure to the acids, greases and fats found in several industrial wastewater. Neoprene, a common artificial elastomer, provides better resistance to environment degradation and resists petroleum items. Nitrile rubber offers excellent essential oil and solvent resistance across a broad temperature range but is assaulted by sunlight and ozone. 

ultraviolet water purification

In addition to environment resistance, gate seals require a durometer or hardness that supports long lasting sealing. Rubber that is hard just like a 90-durometer (Shore A) hockey puck will not compress enough to form a close off between the bottom of a metal door and the concrete frame. Rubber which is soft like a 40-durometer pencil eraser may compress too much and neglect to return to its original thickness once the compressive force is removed. Generally known as compression set, this phenomenon may cause seal failure. 

The shape of the gasket furthermore determines the success of a gate close off. Many rubber profiles are extruded into shapes that resemble characters. Examples include P-seals and J-seals. P-shaped seals have a rounded bulb along with a flat stem. The bulb offers sealing when it is compressed. The come or tail is used for affixing the gasket to the frame. J-seals have an edge or extended lips instead of a rounded bulb. Unlike P-seals, J-seals do not need full compression to deliver effective sealing.

Water-jet cutting does not require expensive steel tooling and makes precise openings for fastener heads.

If you are interested in ro water purification system, please check our website at 

https://www.qileegroup.com for details.

Or contact us

Tel: +86 021 5169 7580

Phone: +86 13817134452 &+86 13817145452 &+86 13918724674

Email: qilee@qileegroup.com

Contact person: Xia Miao

Add: Room 412, Xianglu Building, No. 3009, Gudai Road, Minhang District, Shanghai, China